What if you could create a great looking metal text effect quickly and repeat the process even quicker? Well, with the magic of Photoshop Actions we can recreate a metal effect using a logo or text in just moments with the push of a button. In this tutorial, we are going to add a metal effect to our text while recording the commands with Photoshop Actions. When we’re done, you can recreate the metal effect by simply pressing ‘Play’ in the Actions panel.

Preview

Tutorial Resources

Before we start, make sure you are paying special attention to the settings in my screen captures, especially those dealing with Layer Style Blending Options. You will need to copy these settings in order to achieve the same effects.

Step 1: Setting Up Our Text

In Photoshop, go to File > New (Ctrl/Cmd+N) to create a new document. Set the Width at 600 pixels, the Height at 300 pixels, and the Resolution at 72 pixels/inch.

Next, grab your Horizontal Type Tool (T) to type the text “Design Instruct”. I am using Franklin Gothic Heavy, but feel free to use any bold font of your liking.

Step 2: Starting Our Action

Before we go any further, we need to create a new action that will record what we do.

Open Actions panel through Window > Actions (Alt/Option+F9), and click on the Create new set icon (looks like a folder) at the bottom of the Actions panel and call it “Metal Text”.

Create a new action by selecting the Create new action icon (looks like Post-it note).

Once you create a new action it should start recording automatically (you will see a red record icon in the shape of a circle at the bottom of the Actions panel).

Step 3: Adding Our First Shadow

Go to Select > Load Selection, then create a new layer (Shift+Ctrl/Cmd+N). Fill the new layer with white (#FFFFFF) and hide the original text layer.

We are doing this instead of Rasterizing the text because we are trying to make the action universal with text as well as logos and other one-color images.

Duplicate the new text by going to Layer > Duplicate Layer and move it down below the top text layer (alternative: you can do this by right-clicking on the layer from Layers panel and select Duplicate Layer).

We are going to have two light sources, so this text layer will be the first of the two sources. Go to Layer > Layer Style > Drop Shadow.

When you change these settings, make sure to uncheck Use Global Light. Global Light makes all the shadows and embossing the same angle, and we want two different light sources.

Remember: both light source layers should be above the original text layer.

Step 4: Adding Our Second Shadow

Select the top text layer and go to Layer > Layer Style > Drop Shadow.

Step 5: Adding the Bevel Layer Style

Now we are going to add in our Bevel, which will end up giving us that metal look. So click on the top layer and go to Layer > Layer Style > Bevel and Emboss.

Step 6: Adding the Satin Layer Style

Next, we are going to add a Satin Layer Style. This will give the surface of the text a little bit of inconsistency, adding realism. So go to Layer > Layer Style > Satin.

Step 7: Adding the Gradient Layer Style

The last Layer Style we are going to add to our text is going to darken the text as well as giving our text some light reflection. We are going to use a gray/white gradient to give our text some light stripes going across.

Go to Layer > Layer Style > Gradient Overlay.

Step 8: Creating a Metal Texture

We are going to give our text some metal texture, so make sure you have the top text layer selected, and go to Select > Load Selection.

Go to Layer > New Layer (Shift+Ctrl/Cmd+N) and fill our selection with white.

Now go to Filter > Noise > Add Noise.

Step 9: Finishing a Metal Texture

Deselect our text by going to Select > Deselect (Ctrl/Cmd+D) and then go to Filter > Blur > Motion Blur.

Set the Angle to 42 degrees and the Distance at 38 pixels.

Select our first text layer and go to Select > Load Selection and Select > Inverse (Shift+Ctrl/Cmd+I).

Delete the selected area. This will get rid of the noise that is outside of our text.

Change the blend mode to Multiply.

You are now done creating our  Photoshop action. You can now press stop in and Actions panel.

Step 10: Bringing in Our Background Image

Now we can finish off the image.

Download Wall Texture by Jay Leonhart and bringing it in as our background image and put it behind all the layers.

Step 11: Adding in a Text Texture

We are going to add in a texture to go over the text. Download the Old Film 10 texture by Lost and Taken, and bring it into our document.

Move the texture above all the layers and size it down to around 30% using Edit > Free Transform (Ctrl/Cmd+T). It should match the canvas size.

Change the Blend Mode to Overlay.

Step 12: Adding Some Color

Next, we are going to add some color to our image. This will add consistency to our look while infusing warmth.

Go to Layer > New Adjustment Layer > Gradient Map. Select the Yellow to Purple Gradient and check the reverse box.

Change the Blend Mode to Overlay and set the Opacity to 30%

Step 13: Darkening the Edges

Now we are going to darken the edges by using the Rectangular Marquee Tool (M) and changing the Feather (Shift+F6) to 50 pixels.

Go to Layer > New Layer (Shift+Ctrl/Cmd+N), then Select > Inverse (Shift+Ctrl/Cmd+I) and fill the new layer with black.

Change the Blend Mode to Color Burn.

Step 14: Adding Some Shine

We are going to give our text a little extra shine by using a Brush Tool (B). Set the Size to 20 pixels and Hardness to 0%.

Create a new layers, so Layer > New > Layer (Shift+Ctrl/Cmd+N) and place the new layer under the Old 10 Film texture layer.

Use white (#FFFFFF) as your brush color; dot the spots where the white parts are on the text edges.

Change the Blend Mode to Soft Light.

Step 15: Sharpening the Image

We’re almost there! Let’s add the finishing touches.

First, flatten the image by going to Layer > Flatten Image.

Now duplicate the layer by going to Layer > Duplicate Layer.

Go to Filter > Other > High Pass and set the Radius to 10 pixels.

Change the Blend Mode to Color Burn and the Opacity to 30%.

Flatten these two images.

Step 16: Masking the Edges

Click on the icon to Edit in Quick Mask Mode (Q) from the Tools window.

Using the Gradient Tool (G), select Radial Gradient to click and drag a circle in the middle of the document.

Now, click on the icon to Edit in Standard Mode (Q).

If the marquee showing isn’t on the edges of the canvas go to Select > Inverse (Shift+Ctrl/Cmd+I).

Step 17: Blurring the Edges

Alight, final step: with the area still selected, go to Filter > Blur > Lens Blur and use the settings that I have below.

Tutorial Summary

With the use of simple Photoshop techniques and some stock textures, we were able to create a grungy metal text scene. We added shadows and lights using a variety of techniques, used a few filters, and incorporated textures to make our scene come alive. Most importantly, you can recreate the same metal effect by simply pressing Play with Photoshop Actions. I hope you enjoyed this tutorial and found a few tricks that you can put in “action”.

Download Source Files

Author:

Tyler Denis is a part-time freelance designer from Ashland, New Hampshire. He is also the creator/writer of the design blog Denis Designs/blog, a website dedicated to bringing quality tutorials and inspiration. You can follow him on Twitter or at his personal site, Denis Designs.